LTERIVER PCI Express X4 to 6-Ports Serial ATA/SATA 3.0 Host Controller Card- Plug and Play on Windows OS, MAC OS and Linux Systems-6X 6Gbps Max SATA 3.0 None Raid Ports-Support AHCI Boot Up (PCE-G2S6)

LTERIVER PCE-G2S6 is a PCI Express Gen3 X4 Interface to 6-Ports SATA III (Serial ATA) 6Gbps controller. It will covert PCIE X2 signal on X4 interface 16Gbps total bandwidth to 6-Ports SATA III 6Gbps max speed on desktop PCs and Servers. Allow users add 6X max SATA III HDD/SSD on their system for AHCI Boot Up or Storage Expansion. This PCIE SATA III card will support Plug and Play on Windows OS, Linux, and MAC OS systems, now no need to install driver anymore for PCIE SATA expansion cards.

WARNING:

1. This PCE-G2S6 PCIE SATA card no need to install driver, if PCs or Servers cannot find the added-on HDD/SSD and this device, then double check if the mother board PCIE slot is active and open. Some brand mother board may have defined PCIE function when it produced. User better call mother board manufacture locate the problem.

2. PCE-G2S6 was set on AHCI Boot Up mode. If users using the classical IDE mode, user’s PC will report BSD error. If users do not know which mode is running on PCs, follow steps as below: Windows Device Manage-IDE ATA/ATAPI Controllers- Will see “XXXX SATA AHCI controllers” or "XXXX IDE controller". Make sure system SSD/HDD in AHCI Boot Up mode.

3. PCE-G2S6 is designed on PCIE X4 interface, will works on PCIE X4, X8, X16 slot, not support PCIE X1 slot. Normal mother board will have X16 and X1 only, so users better check if it has empty PCIE X16 slot before purchase.

1. Based on 1X ASMedia ASM1166 PCIE 3.0 Serial ATA advantage HCI controller. PCIE 3.0 X4 signal 16Gbps total bandwidth. Complies with Serial ATA Revision 3.2. Support SATA III speed 6Gbps, SATA II speed 3Gbps, SATA 1 speed 1.5Gbps.

2. The Added on Heat-Sink will Protect the Major Chip ASM1166 from Overheat, Ensure Full SATA III Connection Speed 6Gbps.

3. The Full Size Bracket Mounted on this PCIE SATA Card, will Work on Standard Size PCs. The Low Profile Bracket in the Package will Work on Slim Size PCs.

1. Support Plug and Play on Windows OS, MAC OS, and Linux Kernel system. Supports AMD, ARM, INTEL and MAC hardware platform.

2. PCIE Gen3 X4 interface design, will works on PCIE X4, X8, X16 slot ONLY, NOT works on PCIE X1 slot. Users must check if PCs or Servers have at least one PCIE X4, X8, X16 slot on mother board before purchase.

3. Seamless Connect to SATA III/II/I SSD and HDD. Light up 6X Max SSD or HDD in System.

Product Description:

LTERIVER PCE-G2S6 is a PCI Express Gen3 X4 Interface to 6-Ports SATA III (Serial ATA) 6Gbps controller. It will covert PCIE X2 signal on X4 interface 16Gbps total bandwidth to 6-Ports SATA III 6Gbps max speed on desktop PCs and Servers. Allow users add 6X max SATA III HDD/SSD on their system for AHCI Boot Up or Storage Expansion. This PCIE SATA III card will support Plug and Play on Windows OS, Linux, and MAC OS systems, now no need to install driver anymore for PCIE SATA expansion cards.

WARNING:

1. This PCE-G2S6 PCIE SATA card no need to install driver, if PCs or Servers cannot find the added-on HDD/SSD and this device, then double check if the mother board PCIE slot is active and open. Some brand mother board may have defined PCIE function when it produced. User better call mother board manufacture locate the problem.

2. PCE-G2S6 was set on AHCI Boot Up mode. If users using the classical IDE mode, user’s PC will report BSD error. If users do not know which mode is running on PCs, follow steps as below: Windows Device Manage-IDE ATA/ATAPI Controllers- Will see “XXXX SATA AHCI controllers” or "XXXX IDE controller". Make sure system SSD/HDD in AHCI Boot Up mode.

3. PCE-G2S6 is designed on PCIE X4 interface, will works on PCIE X4, X8, X16 slot, not support PCIE X1 slot. Normal mother board will have X16 and X1 only, so users better check if it has empty PCIE X16 slot before purchase.

Package: 1X PCE-G2S6, 1X User Manual, 1X Low Profile Bracket, 1X Mount Screw, 6X SATA Cable