LTERIVER PCIE to 4-Ports 6Gbps SATA III Card for Windows Server, XP, 7, 8.0, 8.1, 10, 11(32/64), MAC OS and Linux Desktop PCs-4X 6Gbps Max SATA 3.0 None Raid Ports-Support AHCI Boot Up (PCE-G2S4)

LTERIVER PCE-G2S4 is a PCI Express Gen 3 to SATA III (Serial ATA) 6Gbps controller. It will covert PCIE 3.0 X1 signal to 4-Ports 6Gbps max SATA III on desktop PCs, Working Stations, MAC Pros and NAS. The PCIE 3.0 X1 interface will provide 8Gbps total bandwidth for 4X SATA III ports. Allow users add 4X max SATA HDD/SSD on the system for AHCI Boot Up or Storage Expansions. This PCIE SATA III card will support Plug and Play on Windows OS, Linux kernels and MAC OS systems, now no need to install driver anymore for PCIE SATA expansion cards.

WARNING:

1. This PCE-G2S4 PCIE SATA card no need to install driver, if PCs or Servers can not find the added-on HDD/SSD and this device, then double check if the mother board PCIE slot is active and open. Some brand mother board may have defined PCIE function when it produced. User better call mother board manufacture locate the problem.

2. PCE-G2S4 was set on AHCI Boot Up mode. If users using the classical IDE mode, user’s PC will report BSD error. If users do not know which mode is running on PCs, follow steps as below: Windows Device Manage-IDE ATA/ATAPI Controllers- Will see “XXXX SATA AHCI controllers” or “XXX IDE controllers”. Make sure the system SSD/HDD in AHCI Mode.

3. PCE-G2S4 is designed on PCIE X1 interface, will works on PCIE X1, X2, X4, X8, X16 slot. Normal users better check if it has empty PCIE slot before purchase.

4. If user add the new or recovered HDD/SSD on the system, users must add this disk on system by Windows reminder in Windows Device Manager-Storage-Disk Management.

1. Based on ASMedia ASM1064 PCIE 3.0 to SATA III (Serial ATA) advantage HCI controller. Provide 4X SATA III 6Gbps ports for PCs and Servers. Complies with Serial ATA Revision 3.0. Support SATA III speed 6Gbps, SATA II speed 3Gbps, SATA 1 speed 1.5Gbps.

2. The Added-on Heat-Sink will Protect the Major Chip ASM1164 from Overheat. Will Work on AMD, ARM and INTEL Hardware Platform.

3. The Full Size Bracket Mounted on this PCIE SATA Card, will Work on Standard Size PCs. The Low Profile Bracket in the Package will Work on Slim Size PCs.

1. Plug and Play on Windows XP, 7, 8.X, 10, 11(32/64bit) and Windows Server 2003, 2003R2, 2008, 2008R2, 2012, 2012R2, 2019, 2022 (32/64bit). Driver free on MAC OS X and Linux Kernel systems.

2. PCIE Gen3 X1 interface design, will works on PCIE X1, X2, X4, X8, X16 slot. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase.

3. The PCE-G2S4 PCIE 3.0 to 4-Ports NONE-RAID SATA III 6Gbps card will allow users add 4X SATA III ports on desktop PCs, Servers and NAS system for HDD/SSD storage expansion or AHCI boot up. Light up 4X Max 2.5in SSD or 2.5/3.5in HDD in System.

Product Description:

LTERIVER PCE-G2S4 is a PCI Express Gen 3 to SATA III (Serial ATA) 6Gbps controller. It will covert PCIE 3.0 X1 signal to 4-Ports 6Gbps max SATA III on desktop PCs, Working Stations, MAC Pros and NAS. The PCIE 3.0 X1 interface will provide 8Gbps total bandwidth for 4X SATA III ports. Allow users add 4X max SATA HDD/SSD on the system for AHCI Boot Up or Storage Expansions. This PCIE SATA III card will support Plug and Play on Windows OS, Linux kernels and MAC OS systems, now no need to install driver anymore for PCIE SATA expansion cards.

WARNING:

1. This PCE-G2S4 PCIE SATA card no need to install driver, if PCs or Servers can not find the added-on HDD/SSD and this device, then double check if the mother board PCIE slot is active and open. Some brand mother board may have defined PCIE function when it produced. User better call mother board manufacture locate the problem.

2. PCE-G2S4 was set on AHCI Boot Up mode. If users using the classical IDE mode, user’s PC will report BSD error. If users do not know which mode is running on PCs, follow steps as below: Windows Device Manage-IDE ATA/ATAPI Controllers- Will see “XXXX SATA AHCI controllers” or “XXX IDE controllers”. Make sure the system SSD/HDD in AHCI Mode.

3. PCE-G2S4 is designed on PCIE X1 interface, will works on PCIE X1, X2, X4, X8, X16 slot. Normal users better check if it has empty PCIE slot before purchase.

4. If user add the new or recovered HDD/SSD on the system, users must add this disk on system by Windows reminder in Windows Device Manager-Storage-Disk Management.

Package: 1X PCE-G2S4, 1X User Manual, 1X Low Profile Bracket, 1X Mount Screw, 4X SATA Cable